Stick "hook" with 2 mounting bolts and hook
|
Stick "hook" with 2 mounting bolts and hook
|
Stick "hook" mounted on back of stick
|
|
Stick "hook" mounted on back of stick
|
Playing position with lap-stick
|
Playing position with lap-stick
|
|
Mounting plate (version 1) for stick with Steinberger Tripod stand = 3 5/8 * 12 inch piece of 1 inch 9-ply plywood. 3 holes on left are for the stick; hole on the right has threaded insert for the stand
|
5/16 inch threaded board insert detail; I got this (for 55 cents) at Channel City Hardware in Goleta, CA (http://ww3.truevalue.com/channelcitylumber/Home.aspx)
|
Hole with threaded insert recessed
|
|
#10-24 x 1-1/2 machine screws
|
Tap and drill for #10-24 holes
|
Back of grand stick, note bottom hole (new) threaded for #10-24 machine bolt
|
|
Stand-off washers for bolts
|
Mounting plate mounted (version 1)
on grand stick
|
Head of Steinberger Tripod stand with raised mounting lip (center of circle) filed away
|
|
End result: Grand stick on stand
|
End result: Grand stick on stand
|
Version 2 = 12-inches long, stained (black cherry) and oiled (tung oil)
|
|
Detail of the 3 stick mount holes
|
Detail of the threaded insert for the Tripod stand's screw
|
Version 2 mounted on a grand stick
|
|
Detail showing stand-off spacer washers
|
Version 2 in-place
|
All assembled and ready to plug in
|
|
All assembled and ready to plug in (adjusted to playing angle)
|
|
